A good paint job is mostly work you cannot see. The final gloss comes from hours of preparation underneath. If you are thinking about a repaint, it helps to know what the stages are, so you can compare quotes sensibly and understand why quality costs what it does.
Decide the level of finish
- A refresh or driver-quality job: good-looking paint with limited work on the body underneath. It is the quickest and least expensive.
- A high-quality repaint: the car is disassembled and the body is prepared carefully so panels are straight and the finish is smooth.
- A show-level job: the most thorough: everything removed, every panel worked until it is as flat as possible, and long hours of sanding and polishing.
Ask each shop which level their quote covers.
Stage 1: Teardown
For the best result, a shop takes off trim, bumpers, lights, glass and door handles, and sometimes the doors and fenders, so paint covers the edges and jambs. Masking everything instead is faster and cheaper but leaves edges where old and new paint can show.
Stage 2: Stripping and inspection
The shop removes old paint, either to bare metal or down to a sound layer. This shows the real condition of the panels. It is where rust, old dents and thick layers of filler come to light, and where the estimate can change.
Stage 3: Metal and body work
Rust is cut out and repaired, dents are straightened, and panel gaps are adjusted. Body filler, when it is used, goes on in thin layers over properly prepared metal, not over rust.
Stage 4: Priming and block sanding
A primer is applied, then sanded flat using long, firm sanding blocks, and the process is repeated several times. This is the stage that makes the panels look straight in reflections. It is slow, and good shops do not rush it.
Stage 5: Sealer and color
After final sanding, the shop cleans the car carefully and applies a sealer, then the color. Many modern paint jobs use a base coat in color followed by a clear coat for gloss and protection. Some original-style finishes use a single-stage paint, which suits certain older cars.
Stage 6: Cut, polish and reassembly
When the paint has cured enough, the shop sands lightly and polishes the surface to remove dust and the slight texture called orange peel. Then the trim, glass and parts go back on carefully.
Curing and care
Fresh paint needs time to harden fully. Ask the shop when you can wash and wax the car. Many shops suggest waiting a good while before waxing. Avoid parking under trees and keep bird droppings off.
Why quotes differ so much
- How much teardown and bodywork the quote includes
- The quality of materials
- The number of hours of prep
- How many coats of primer, base and clear
- Whether the shop does the metalwork or sends it out
Choosing a painter
Ask to see finished cars, especially in daylight, and ask how the shop handles problems after delivery. Search CarGuysGuide for shops that do paint and bodywork on your type of car, and compare quotes by the scope of work, not only the price.

