One of the most popular upgrades for a classic car is swapping its front drum brakes for discs. It can transform how a car stops, but it is not just a matter of bolting on a kit. Here is what to know before you decide.

How drum brakes work

A drum brake presses curved shoes outward against the inside of a spinning drum. They were standard for decades, and they stop a car perfectly well in normal use when they are in good condition and adjusted properly.

What discs do better

  • Heat: a disc is open to the air and sheds heat much better. Drums can fade after repeated hard stops, such as on a long downhill.
  • Wet weather: a disc throws water off quickly, so it recovers fast after driving through a puddle.
  • Consistency: discs tend to give steadier pedal feel and more even stopping.
  • Service: pads are usually easier to inspect and change than shoes.

What a conversion involves

Most kits convert the front brakes only, because the front does most of the stopping. A proper conversion usually involves several parts, not just the discs and calipers:

  • New spindles or brackets and rotors that fit your car
  • New hoses and lines
  • Often a different master cylinder, because a disc brake needs a different volume of fluid than a drum
  • A proportioning valve or a combination valve, to balance front and rear braking
  • Possibly a power brake booster, for good pedal effort

Ask the kit maker exactly what comes in the box, and what your car needs on top of it.

Check the wheels

Disc brake parts take up more room than drums. Some original wheels will not clear the new calipers, so check the kit's requirements before ordering.

Originality and judging

If you show the car in judged events, an upgrade like this may count against you in an original or factory-correct class. Some owners choose a kit that bolts on and can be reversed. Others keep the original parts boxed up so a future owner can restore them.

When drums are fine

A well-maintained drum system on a car that is driven gently and sparingly is perfectly safe. Often the most useful upgrade comes first: fresh shoes, drums in good shape, correct adjustment, new hoses, and clean fluid. Then drive it and see if you still want discs.

Safety first

  • Brakes are not the place to improvise. Use quality parts from a reputable maker.
  • Have the system bled and tested carefully, and check for leaks again after the first few drives.
  • Test the car in a safe place before you drive it in traffic.

Finding a shop

If you do not want to do it yourself, look for a shop that converts brakes regularly. Search the CarGuysGuide directory for brake and disc brake conversion work on your make of car.