Tires are the only part of your car that touches the road, and on a classic they are easy to overlook. Cars that are driven a few hundred miles a year can wear out tires by age long before they wear out their tread. Here is how to read a tire's age, and how to think about bias-ply versus radial.
Tires age
Rubber hardens and cracks with time, sunlight and ozone, even if the tire never touches the road. A tire can look perfect and still be unsafe. Many tire makers and vehicle makers recommend replacing tires that are around six to ten years old, no matter how much tread is left. Follow the guidance in your owner's manual or from the tire maker.
How to read the date code
Look at the sidewall for the letters DOT followed by a series of letters and numbers. On tires made since 2000, the last four digits tell you when the tire was made: the first two are the week of the year and the last two are the year.
For example, 2319 means the 23rd week of 2019. Tires made before 2000 use three digits, and they are too old to trust. Check both sides of the tire, because the full code is sometimes only on the inside.
Check them by eye
- Cracks in the sidewall or between the tread blocks
- Bulges or bumps in the sidewall
- Flat spots from sitting in one place
- Uneven wear that points to alignment or suspension problems
Do not forget the spare tire. It is usually the oldest tire on the car.
Bias-ply or radial?
The difference is in how the tire is built.
- Bias-ply tires have layers of cord that cross each other at an angle. They are what most cars wore until the late 1960s and early 1970s, and they give the look and ride that period-correct restorations call for.
- Radial tires have cords that run straight across the tire, with belts under the tread. They generally last longer, grip better, resist heat and give a smoother ride at highway speeds.
Which should you choose?
- For a show car judged on originality, bias-ply tires in the correct style may be what the rules want.
- For a car you drive a lot, radials are usually the practical choice.
- If you switch to radials, tell your alignment shop. Steering and suspension designed for bias-ply tires can feel different, so some cars need an alignment adjustment, and a few need different shocks or springs.
Size, wheels and pressure
- Check that the tire size fits the wheel width and clears the fenders and suspension.
- Use the pressure recommended for your car, not the maximum printed on the tire sidewall. Check the manual, a door jamb sticker or the tire maker.
- Check pressure when the tires are cold, and before long trips.
Storage
A car sitting in one place for months can develop flat spots. Inflate the tires a little higher or put the car on stands. Keep tires out of direct sunlight.
Get fitted properly
Mounting tires on old wheels takes care. A shop that works on classics knows how to protect wheels and how to balance them well. Find one in the CarGuysGuide directory.


